---
title: "FAQ: The most common questions on your first test"
description: "Where to find the results, barely any blood, which tube, invert or shake: the questions that come up on almost every first test – each with its answer."
url: https://help.anivahealth.com/pl/articles/19-faq-the-most-common-questions-on-your-first-test
collection: "For pharmacies"
updated: 2026-11-15
language: pl
alternates: [de, en]
---

# FAQ: The most common questions on your first test

Where to find the results, barely any blood, which tube, invert or shake: the questions that come up on almost every first test – each with its answer.

_Part 5 of 8 ·_ [_← Your first test – step by step_](https://help.anivahealth.com/en/articles/14-your-first-test-step-by-step.md)

* * *

On a first test it's almost always the same questions. Here they are, each with its answer – read them once and the first test runs smoothly.

### **“Where do I find the results?”**

In the admin panel on the left under **Results**. Every blood draw is listed there. Filter with the tabs **Ready**, **Not ready yet** and **All**; the search finds a customer by name, date of birth or tube barcode. The lab report button opens the PDF.

The report is usually ready **3 to 5 days at most after the draw**. Until then the appointment shows under “Not ready yet” – that's not an error. **So you don't have to keep checking:** switch on the email notification for the results when you create the appointment, and you'll get an email as soon as all values are in. If nothing has arrived after 5 days, write to us via the chat in the admin panel and we'll check where the sample is.

### **“How does the customer get their report?”**

In the pharmacy, as standard: the customer comes back for the report and you advise them with the numbers on the table. If they insist on getting it by email, click the button to email the customer under Results. The PDF is protected with their **date of birth** (DDMMYYYY).

### **“Hardly any blood is coming”**

Almost always it comes down to one of three things: not enough to drink, an arm that is too cold, or the button not held long enough.

-   **Drinking.** Whoever hasn't drunk enough beforehand gives hardly any blood – a glass of water before the draw is part of the procedure, including when you test yourself.
    
-   **Warming – one to two minutes are enough.** Rub the upper arm warm, tap it, or put a heat pack on it. With a well-warmed arm the tube fills briskly; with a cold one it takes longer – that's not a defect.
    
-   **Holding the button.** Press the red button firmly and keep holding it for three seconds after the click.
    

And: **expect three to four minutes**, five at most. The video is edited and looks quicker than a real draw – four minutes is no reason to stop. If the flow stops midway, a second firm press on the red button can clear a blockage. Once the Tasso is off the arm, it is used up.

### **“Invert or shake?”**

Invert. Right after the draw, **turn the tube ten times top to bottom and back**, slowly, as shown in the video – and **do not shake**. Serum and blood not visibly mixing is normal and no reason to be more forceful. This applies to both tubes.

**The red tube has no separating gel**, so there is no layer at the bottom to watch out for. If you are using a yellow tube from an older kit: the layer at the bottom is a solid separating gel and must not mix with the blood. So invert rather than shake, and don't open the tube.

### **“The sample doesn't look good – send it in or throw it away?”**

**Send it in.** Dark, uneven, small clots, less blood than expected – it looks worse than it is. The lab centrifuges the sample anyway, and a result can usually still be obtained from what is there. Throwing it away definitely produces none. If the lab genuinely cannot measure a value, that value isn't invoiced either.

### **“Which tube do I use?”**

The **red serum tube** for all values except blood sugar. You only need the **purple EDTA tube** for long-term blood sugar (HbA1c) – everything else runs on serum.

### **“Red or yellow – what's the difference?”**

Both are serum tubes. The yellow one has a separating gel at the bottom, the red one doesn't. Without gel there is room for more blood, so panels with many values come through more reliably. New kits only contain red tubes. You can use up yellow ones from older kits.

### **“How many tubes do I need?”**

As many as the **tube overview** shows for the appointment. Usually it's one, even if you book several panels or individual values – they share a tube as long as it has room. If the overview shows two, you really need two. Fill every tube **as full as possible**. On the red tube the upper mark is already at 500 µl – so don't stop there. If it only reaches the lower mark, send it in anyway – a lot can usually still be analysed.

### **“Does the customer need to fast?”**

For most values, no. Only two need attention:

-   **Triglycerides (blood fats):** can come out higher after a meal or some alcohol the evening before. Anyone testing their lipids ideally comes before breakfast.
    
-   **HbA1c (long-term blood sugar):** reacts far less to breakfast than a normal blood sugar value. Fasting is still slightly better.
    

### **“Do I have to write anything on the tube or the shipping pouch?”**

No. No name, no address, no pharmacy name – the match runs exclusively via the barcode. You seal the white shipping pouch by pulling off the adhesive strip and sticking it down. The courier brings the return label.

### **“How do I test myself or my team?”**

Exactly like you would for a customer: create an appointment in the admin panel and enter yourself as a **new patient** – with name, date of birth and sex. You'll then find the report under Results.

**Important: the admin account is not a patient.** It's the login you work with in the admin panel – don't select it as the patient on an appointment, create a new person instead. That also holds when you run the test on yourself.

### **“I ended up in the onboarding for end customers”**

Then you probably came in through the sign-in for end customers – for example by googling “Aniva login”. Signing up there starts the end-customer onboarding. You can reach the admin panel directly at [anivahealth.com/de/admin](https://anivahealth.com/de/admin). Everything the pharmacy does – create appointments, enter barcodes, view reports – happens there.

If something got created that shouldn't have: drop us a line via the **chat in the admin panel** and we'll clean it up. It doesn't cost you anything.

### **“When is the sample picked up – and how do I store it until then?”**

On the next working day as standard. You enter the barcode for each tube in the admin panel and confirm the blood draw – every evening we check which samples are ready and arrange the pickup. You don't need to announce anything or wait for a courier. **Room temperature is perfectly sufficient**; the sample does not need to be refrigerated and keeps overnight without a problem.

Something else stuck? Write to us via the **chat in the admin panel** – click the chat icon in the bottom right. You order new material there via **“Material bestellen”**.

* * *

**Next in the track**

[

How does the trial phase work?

Try the blood test on yourself before you actively sell it – here's how.

](https://help.anivahealth.com/en/articles/15-how-does-the-trial-phase-work.md)

[_← Your first test – step by step_](https://help.anivahealth.com/en/articles/14-your-first-test-step-by-step.md) _·_ [_All articles_](https://help.anivahealth.com/en/collections/4-fur-apotheken)
